Test and Measurement Solutions 

Javascript DHTML Drop Down Menu Powered by dhtml-menu-builder.com

 

Multi Range DC Power Supply.

 

Phone: (02)9402 7678

Fax:     (02)9402 8113

Email: sales@unispan.com.au

60Volt Multi Range 60V/5A DC Power Supply
Model 9110

Photo: Front view of Model 9110


Models 9110 and 9111 are a new type of power supply. Unlike conventional power supplies with fixed output ratings, they automatically recalculate voltage and current limits for each setting, providing any Volt/Amp combination within the rated power. By providing greatly expanded choices of maximum power Volt/Amp combinations, users can cut down on the number of power supplies required and free up valuable bench space.
  • Output rating up to 180 W within 60 V/ 8 A (model 9111) or 100 W within 60 V/ 5 A (model 9110)
  • Digitally controlled, multi-ranging output
  • 10mV/1mA resolution over the full range
  • Bright, easy to read display
  • Very compact and lightweight
  • Low ripple and noise
  • OCP, OVP and OTP protection
  • Output On/Off control
  • Store and Recall 4 x 100 groups of preset Volt/Amp values
  •  

          Information Requests | Datasheet | Manual

     

    60Volt Multi Range 60V/5A DC Power Supply
    Model 9111


    Models 9110 and 9111 are a new type of power supply. Unlike conventional power supplies with fixed output ratings, they automatically recalculate voltage and current limits for each setting, providing any Volt/Amp combination within the rated power. By providing greatly expanded choices of maximum power Volt/Amp combinations, users can cut down on the number of power supplies required and free up valuable bench space.
  • Output rating up to 180 W within 60 V/ 8 A (model 9111) or 100 W within 60 V/ 5 A (model 9110)
  • Digitally controlled, multi-ranging output
  • 10mV/1mA resolution over the full range
  • Bright, easy to read display
  • Very compact and lightweight
  • Low ripple and noise
  • OCP, OVP and OTP protection
  • Output On/Off control
  • Store and Recall 4 x 100 groups of preset Volt/Amp values
  •  

          Information Requests | Datasheet | Manual

     

    Dual Range 0-30V, 0-3A or 0-60V, 0-2A DC Power Supply
    Model 1737


    The B&K Precision model 1737 is a general purpose dual range DC power source. This power supply has two ranges and can output higher voltage at a lower current range or higher current at a lower voltage range. The 1737 provides a 0-30 V, 0-3 A range and a 0-60 V, 0-2 A range. Voltage and current are both adjustable with coarse and fine control knobs. Two large LED meters continuously monitor the output voltage and current. The power supply can be operated locally from the front panel or remotely through the RS-232 interface.
    • Low ripple and noise
    • Excellent regulation
    • Constant voltage (CV) and constant current (CC) operation
    • Two large, easy-to-read LED displays provide good visibility in bright or low light
    • LED indication for CV and CC modes
    • Automatic recall of last settings on power up
    • RS-232 interface
    • Isolated output
    • Overload protection
    • Reverse polarity protection

          Information Requests | Datasheet | Manual

     

    Dual Range 0-35V, 0-10A or 0-60V, 0-5A DC Power Supply
    Model 1747


    The B&K Precision model 1747 is a general purpose dual range DC power source. This power supply has two ranges and can output higher voltage at a lower current range or higher current at a lower voltage range. The 1747 provides a 0-35 V, 0-10 A range and a 0-60 V, 0-5 A range. Voltage and current are both adjustable with coarse and fine control knobs. Two large LED meters continuously monitor the output voltage and current. The power supply can be operated locally from the front panel or remotely through the RS-232 interface.
    • Low ripple and noise
    • Excellent regulation
    • Constant voltage (CV) and constant current (CC) operation
    • Two large, easy-to-read LED displays provide good visibility in bright or low light
    • LED indication for CV and CC modes
    • Automatic recall of last settings on power up
    • RS-232 interface
    • Isolated output
    • Overload protection
    • Reverse polarity protection

          Information Requests | Datasheet | Manual

     

    0-30V, 0-1A Low Current High Resolution DC Power Supply
    Model 1739


    The model 1739 is a high resolution, low current DC power source with excellent load regulation and low noise characteristics. Two 4-digit LED displays continuously monitor the output voltage and current. The power supplies can be operated locally from the front panel or remotely through the RS-232 interface. The mechanical configuration conserves bench space and allows for easy portability.

    Using a MOSFET circuit design and high quality components with very low temperature coefficients, the power supply is extremely stable and capable of outputting current as low as 1 mA with a 100 uA settable resolution. This power supply was designed for electrical and electronics applications requiring precise levels of low current, including 4-20 mA current loop testing, calibration, or basic IC testing.

    • Low 1 mA settable current limit with 0.1 mA resolution
    • Output on/off button
    • Exceptionally low current ripple and noise (<0.4 mArms)
    • Excellent regulation
    • Constant voltage (CV) and constant current (CC) operation
    • Two large, easy-to-read LED displays provide good visibility in bright or low light conditions
    • CV and CC mode indicator
    • Automatic recall of saved voltage and current settings upon power-up
    • RS-232 interface
    • Isolated output
    • Overload and reverse polarity protection
    • Power-on self test

          Information Requests | Datasheet | Manual

     

    1200watt Multi-Range 80V/60A DC Power Supply
    Models 9115, 9115-AT, 9116 and 9117

     

     


    Any 9115 Series model can replace several supplies on your bench or in your rack. Unlike conventional supplies with fixed output ratings, these multi-range power supplies automatically recalculate voltage and current limits for each setting, providing full output power in any Volt/Amp combination within the rated voltage and current limits.

    For benchtop applications, this series provides a numerical keypad for direct data entry along with convenient cursors and analog style knobs to quickly make incremental voltage or current changes. Systems integrators benefit from the standard USB (USBTMC-compliant), RS-232, GPIB, RS-485, and LAN (9117 only) interfaces supporting SCPI commands.

    The 9115-AT provides automotive power test waveforms compliant to DIN 40839 and ISO 16750-2 standards that can simulate common test conditions for electrical and electronic devices installed in automobiles. 

    • Multi-ranging operation (output up to max power rating within maximum voltage and current rating)
    • Compact, high density, 1U rackmount form factor (2U for 9117)
    • High programming and readback resolution
    • Adjustable voltage rise and fall times
    • Sequence programming (internal list mode for 9115, 9115-AT, and 9116)
    • Store and recall up to 100 instrument settings
    • Standard USB (USBTMC-compliant), RS-232, GPIB, RS-485, and LAN (9117 only) interfaces supporting SCPI commands for remote control
    • Analog interface with control and monitoring functions
    • Remote sense
    • Overvoltage protection (OVP), overpower protection (OPP), overtemperature protection (OTP), and key-lock function
    • Softpanel for remote control, test sequence generation, and data logging. This software also integrates with Data Dashboard for LabVIEW apps enabling iOS, Android or Windows 8 compatible tablets or smart phones to remotely monitor select measurement indicators

    Models

    Voltage Current Automotive Test
    9115 0 - 80 V 0 - 60 A NA
    9116 0 - 150 V 0 - 30 A NA
    9115-AT 0 - 80 V 0 - 60 A Yes
    9117 0 - 80 V 0 - 120 A NA

     

          Information Requests | Datasheet | Manual | Programming Manual

     

    Dual Range DC Power Supply 0-10V, 0-10A /10-20V, 5A
    Model 9171


    The 9170/9180 series programmable DC power supplies deliver clean, stable and precise output power due to the supplies’ exceptionally low ripple and noise, low temperature coefficient, excellent regulation and fast transient response time characteristics.

    These power supplies offer SCPI IEEE488.2 compliant USB (standard), RS232, RS485, GPIB and LAN interfaces, combined with front and rear panel output and remote sense terminals to facilitate test system development and integration. The LAN interface includes a built-in web server that allows users to configure, control, or monitor basic power supply settings.

    In addition to a full numerical keypad for convenient data entry, this series also provides unique features not typically found in comparable power sources, such as LED test modes, modular interface card slots, automatic range selection, and an optional 8-bit bidirectional digital I/O interface.

    • Single and dual output models with up to 210W output power
    • Exceptionally low ripple and noise
    • Front and rear panel output
    • List mode for executing up to 10 stored test sequences with a maximum of 150 steps in total
    • Overvoltage/overcurrent/overtemperature protection (OVP/OCP/OTP) and key-lock function
    • Fast transient response time of < 50 us for most models
    • Programmable voltage and current slew rates
    • Standard USB interface
    • 4 optional types of modular interface cards add LAN and GPIB, Digital I/O and Analog Control, RS485, or RS232 functionality
    • LabVIEW (TM) drivers available
       
    Model Guide
    Model 9171 9172 9173 9174 9181 9182 9183 9184 9185
    Voltage
    Ranges
    10V,
    20V
    35V,
    70V
    10V,
    20V
    35V,
    70V
    18V,
    36V
    10V,
    20V
    35V,
    70V
    100V,
    200V
    400V,
    600V
    Max
    Current
    10A,
    5A
    3A,
    1.5A
    10A,
    5A
    3A,
    1.5A
    8A,
    4A
    20A,
    10A
    6A,
    3A
    2A,
    1A
    0.5A,
    0.35A
    Number
    Outputs
    1 1 2 2 1 1 1 1 1

         

    Information Requests | Datasheet | Manual | Comparison Guide

     

    Dual Range DC Power Supply 0-35V, 0-3A /35-70V, 1.5A
    Model 9172


    The 9170/9180 series programmable DC power supplies deliver clean, stable and precise output power due to the supplies’ exceptionally low ripple and noise, low temperature coefficient, excellent regulation and fast transient response time characteristics.

    These power supplies offer SCPI IEEE488.2 compliant USB (standard), RS232, RS485, GPIB and LAN interfaces, combined with front and rear panel output and remote sense terminals to facilitate test system development and integration. The LAN interface includes a built-in web server that allows users to configure, control, or monitor basic power supply settings.

    In addition to a full numerical keypad for convenient data entry, this series also provides unique features not typically found in comparable power sources, such as LED test modes, modular interface card slots, automatic range selection, and an optional 8-bit bidirectional digital I/O interface.

    • Single and dual output models with up to 210W output power
    • Exceptionally low ripple and noise
    • Front and rear panel output
    • List mode for executing up to 10 stored test sequences with a maximum of 150 steps in total
    • Overvoltage/overcurrent/overtemperature protection (OVP/OCP/OTP) and key-lock function
    • Fast transient response time of < 50 us for most models
    • Programmable voltage and current slew rates
    • Standard USB interface
    • 4 optional types of modular interface cards add LAN and GPIB, Digital I/O and Analog Control, RS485, or RS232 functionality
    • LabVIEW (TM) drivers available
       
    Model Guide
    Model 9171 9172 9173 9174 9181 9182 9183 9184 9185
    Voltage
    Ranges
    10V,
    20V
    35V,
    70V
    10V,
    20V
    35V,
    70V
    18V,
    36V
    10V,
    20V
    35V,
    70V
    100V,
    200V
    400V,
    600V
    Max
    Current
    10A,
    5A
    3A,
    1.5A
    10A,
    5A
    3A,
    1.5A
    8A,
    4A
    20A,
    10A
    6A,
    3A
    2A,
    1A
    0.5A,
    0.35A
    Number
    Outputs
    1 1 2 2 1 1 1 1 1

         

    Information Requests | Datasheet | Manual | Comparison Guide

     

    Two Channel Dual Range DC Power Supply 0-10V, 0-10A /10-20V, 5A
    Model 9173


    The 9170/9180 series programmable DC power supplies deliver clean, stable and precise output power due to the supplies’ exceptionally low ripple and noise, low temperature coefficient, excellent regulation and fast transient response time characteristics.

    These power supplies offer SCPI IEEE488.2 compliant USB (standard), RS232, RS485, GPIB and LAN interfaces, combined with front and rear panel output and remote sense terminals to facilitate test system development and integration. The LAN interface includes a built-in web server that allows users to configure, control, or monitor basic power supply settings.

    In addition to a full numerical keypad for convenient data entry, this series also provides unique features not typically found in comparable power sources, such as LED test modes, modular interface card slots, automatic range selection, and an optional 8-bit bidirectional digital I/O interface.

    • Single and dual output models with up to 210W output power
    • Exceptionally low ripple and noise
    • Front and rear panel output
    • List mode for executing up to 10 stored test sequences with a maximum of 150 steps in total
    • Overvoltage/overcurrent/overtemperature protection (OVP/OCP/OTP) and key-lock function
    • Fast transient response time of < 50 us for most models
    • Programmable voltage and current slew rates
    • Standard USB interface
    • 4 optional types of modular interface cards add LAN and GPIB, Digital I/O and Analog Control, RS485, or RS232 functionality
    • LabVIEW (TM) drivers available
       
    Model Guide
    Model 9171 9172 9173 9174 9181 9182 9183 9184 9185
    Voltage
    Ranges
    10V,
    20V
    35V,
    70V
    10V,
    20V
    35V,
    70V
    18V,
    36V
    10V,
    20V
    35V,
    70V
    100V,
    200V
    400V,
    600V
    Max
    Current
    10A,
    5A
    3A,
    1.5A
    10A,
    5A
    3A,
    1.5A
    8A,
    4A
    20A,
    10A
    6A,
    3A
    2A,
    1A
    0.5A,
    0.35A
    Number
    Outputs
    1 1 2 2 1 1 1 1 1

         

    Information Requests | Datasheet | Manual | Comparison Guide

     

    Two Channel Dual Range DC Power Supply 0-35V, 0-3A /35-70V, 1.5A
    Model 9174


    The 9170/9180 series programmable DC power supplies deliver clean, stable and precise output power due to the supplies’ exceptionally low ripple and noise, low temperature coefficient, excellent regulation and fast transient response time characteristics.

    These power supplies offer SCPI IEEE488.2 compliant USB (standard), RS232, RS485, GPIB and LAN interfaces, combined with front and rear panel output and remote sense terminals to facilitate test system development and integration. The LAN interface includes a built-in web server that allows users to configure, control, or monitor basic power supply settings.

    In addition to a full numerical keypad for convenient data entry, this series also provides unique features not typically found in comparable power sources, such as LED test modes, modular interface card slots, automatic range selection, and an optional 8-bit bidirectional digital I/O interface.

    • Single and dual output models with up to 210W output power
    • Exceptionally low ripple and noise
    • Front and rear panel output
    • List mode for executing up to 10 stored test sequences with a maximum of 150 steps in total
    • Overvoltage/overcurrent/overtemperature protection (OVP/OCP/OTP) and key-lock function
    • Fast transient response time of < 50 us for most models
    • Programmable voltage and current slew rates
    • Standard USB interface
    • 4 optional types of modular interface cards add LAN and GPIB, Digital I/O and Analog Control, RS485, or RS232 functionality
    • LabVIEW (TM) drivers available
       
    Model Guide
    Model 9171 9172 9173 9174 9181 9182 9183 9184 9185
    Voltage
    Ranges
    10V,
    20V
    35V,
    70V
    10V,
    20V
    35V,
    70V
    18V,
    36V
    10V,
    20V
    35V,
    70V
    100V,
    200V
    400V,
    600V
    Max
    Current
    10A,
    5A
    3A,
    1.5A
    10A,
    5A
    3A,
    1.5A
    8A,
    4A
    20A,
    10A
    6A,
    3A
    2A,
    1A
    0.5A,
    0.35A
    Number
    Outputs
    1 1 2 2 1 1 1 1 1

         

    Information Requests | Datasheet | Manual | Comparison Guide

     

    Dual Range DC Power Supply 0-18V, 8A /18-36V, 4A
    Model 9181


    The 9170/9180 series programmable DC power supplies deliver clean, stable and precise output power due to the supplies’ exceptionally low ripple and noise, low temperature coefficient, excellent regulation and fast transient response time characteristics.

    These power supplies offer SCPI IEEE488.2 compliant USB (standard), RS232, RS485, GPIB and LAN interfaces, combined with front and rear panel output and remote sense terminals to facilitate test system development and integration. The LAN interface includes a built-in web server that allows users to configure, control, or monitor basic power supply settings.

    In addition to a full numerical keypad for convenient data entry, this series also provides unique features not typically found in comparable power sources, such as LED test modes, modular interface card slots, automatic range selection, and an optional 8-bit bidirectional digital I/O interface.

    • Single and dual output models with up to 210W output power
    • Exceptionally low ripple and noise
    • Front and rear panel output
    • List mode for executing up to 10 stored test sequences with a maximum of 150 steps in total
    • Overvoltage/overcurrent/overtemperature protection (OVP/OCP/OTP) and key-lock function
    • Fast transient response time of < 50 us for most models
    • Programmable voltage and current slew rates
    • Standard USB interface
    • 4 optional types of modular interface cards add LAN and GPIB, Digital I/O and Analog Control, RS485, or RS232 functionality
    • LabVIEW (TM) drivers available
       
    Model Guide
    Model 9171 9172 9173 9174 9181 9182 9183 9184 9185
    Voltage
    Ranges
    10V,
    20V
    35V,
    70V
    10V,
    20V
    35V,
    70V
    18V,
    36V
    10V,
    20V
    35V,
    70V
    100V,
    200V
    400V,
    600V
    Max
    Current
    10A,
    5A
    3A,
    1.5A
    10A,
    5A
    3A,
    1.5A
    8A,
    4A
    20A,
    10A
    6A,
    3A
    2A,
    1A
    0.5A,
    0.35A
    Number
    Outputs
    1 1 2 2 1 1 1 1 1

         

    Information Requests | Datasheet | Manual | Comparison Guide

     

    Dual Range DC Power Supply 0-10V, 0-20A /10-20V, 10A
    Model 9182


    The 9170/9180 series programmable DC power supplies deliver clean, stable and precise output power due to the supplies’ exceptionally low ripple and noise, low temperature coefficient, excellent regulation and fast transient response time characteristics.

    These power supplies offer SCPI IEEE488.2 compliant USB (standard), RS232, RS485, GPIB and LAN interfaces, combined with front and rear panel output and remote sense terminals to facilitate test system development and integration. The LAN interface includes a built-in web server that allows users to configure, control, or monitor basic power supply settings.

    In addition to a full numerical keypad for convenient data entry, this series also provides unique features not typically found in comparable power sources, such as LED test modes, modular interface card slots, automatic range selection, and an optional 8-bit bidirectional digital I/O interface.

    • Single and dual output models with up to 210W output power
    • Exceptionally low ripple and noise
    • Front and rear panel output
    • List mode for executing up to 10 stored test sequences with a maximum of 150 steps in total
    • Overvoltage/overcurrent/overtemperature protection (OVP/OCP/OTP) and key-lock function
    • Fast transient response time of < 50 us for most models
    • Programmable voltage and current slew rates
    • Standard USB interface
    • 4 optional types of modular interface cards add LAN and GPIB, Digital I/O and Analog Control, RS485, or RS232 functionality
    • LabVIEW (TM) drivers available
       
    Model Guide
    Model 9171 9172 9173 9174 9181 9182 9183 9184 9185
    Voltage
    Ranges
    10V,
    20V
    35V,
    70V
    10V,
    20V
    35V,
    70V
    18V,
    36V
    10V,
    20V
    35V,
    70V
    100V,
    200V
    400V,
    600V
    Max
    Current
    10A,
    5A
    3A,
    1.5A
    10A,
    5A
    3A,
    1.5A
    8A,
    4A
    20A,
    10A
    6A,
    3A
    2A,
    1A
    0.5A,
    0.35A
    Number
    Outputs
    1 1 2 2 1 1 1 1 1

         

    Information Requests | Datasheet | Manual | Comparison Guide

     

    Dual Range DC Power Supply 0-35V, 0-6A /35 - 70V, 3A
    Model 9183


    The 9170/9180 series programmable DC power supplies deliver clean, stable and precise output power due to the supplies’ exceptionally low ripple and noise, low temperature coefficient, excellent regulation and fast transient response time characteristics.

    These power supplies offer SCPI IEEE488.2 compliant USB (standard), RS232, RS485, GPIB and LAN interfaces, combined with front and rear panel output and remote sense terminals to facilitate test system development and integration. The LAN interface includes a built-in web server that allows users to configure, control, or monitor basic power supply settings.

    In addition to a full numerical keypad for convenient data entry, this series also provides unique features not typically found in comparable power sources, such as LED test modes, modular interface card slots, automatic range selection, and an optional 8-bit bidirectional digital I/O interface.

    • Single and dual output models with up to 210W output power
    • Exceptionally low ripple and noise
    • Front and rear panel output
    • List mode for executing up to 10 stored test sequences with a maximum of 150 steps in total
    • Overvoltage/overcurrent/overtemperature protection (OVP/OCP/OTP) and key-lock function
    • Fast transient response time of < 50 us for most models
    • Programmable voltage and current slew rates
    • Standard USB interface
    • 4 optional types of modular interface cards add LAN and GPIB, Digital I/O and Analog Control, RS485, or RS232 functionality
    • LabVIEW (TM) drivers available
       
    Model Guide
    Model 9171 9172 9173 9174 9181 9182 9183 9184 9185
    Voltage
    Ranges
    10V,
    20V
    35V,
    70V
    10V,
    20V
    35V,
    70V
    18V,
    36V
    10V,
    20V
    35V,
    70V
    100V,
    200V
    400V,
    600V
    Max
    Current
    10A,
    5A
    3A,
    1.5A
    10A,
    5A
    3A,
    1.5A
    8A,
    4A
    20A,
    10A
    6A,
    3A
    2A,
    1A
    0.5A,
    0.35A
    Number
    Outputs
    1 1 2 2 1 1 1 1 1

         

    Information Requests | Datasheet | Manual | Comparison Guide

     

    Dual Range DC Power Supply 0-100V, 0-2A /100-200V, 1A
    Model 9184


    The 9170/9180 series programmable DC power supplies deliver clean, stable and precise output power due to the supplies’ exceptionally low ripple and noise, low temperature coefficient, excellent regulation and fast transient response time characteristics.

    These power supplies offer SCPI IEEE488.2 compliant USB (standard), RS232, RS485, GPIB and LAN interfaces, combined with front and rear panel output and remote sense terminals to facilitate test system development and integration. The LAN interface includes a built-in web server that allows users to configure, control, or monitor basic power supply settings.

    In addition to a full numerical keypad for convenient data entry, this series also provides unique features not typically found in comparable power sources, such as LED test modes, modular interface card slots, automatic range selection, and an optional 8-bit bidirectional digital I/O interface.

    • Single and dual output models with up to 210W output power
    • Exceptionally low ripple and noise
    • Front and rear panel output
    • List mode for executing up to 10 stored test sequences with a maximum of 150 steps in total
    • Overvoltage/overcurrent/overtemperature protection (OVP/OCP/OTP) and key-lock function
    • Fast transient response time of < 50 us for most models
    • Programmable voltage and current slew rates
    • Standard USB interface
    • 4 optional types of modular interface cards add LAN and GPIB, Digital I/O and Analog Control, RS485, or RS232 functionality
    • LabVIEW (TM) drivers available
       
    Model Guide
    Model 9171 9172 9173 9174 9181 9182 9183 9184 9185
    Voltage
    Ranges
    10V,
    20V
    35V,
    70V
    10V,
    20V
    35V,
    70V
    18V,
    36V
    10V,
    20V
    35V,
    70V
    100V,
    200V
    400V,
    600V
    Max
    Current
    10A,
    5A
    3A,
    1.5A
    10A,
    5A
    3A,
    1.5A
    8A,
    4A
    20A,
    10A
    6A,
    3A
    2A,
    1A
    0.5A,
    0.35A
    Number
    Outputs
    1 1 2 2 1 1 1 1 1

         

    Information Requests | Datasheet | Manual | Comparison Guide

     

    Dual Range DC Power Supply 0-400V, 0-0.5A /400 - 600V, 0.35A
    Model 9185


    The 9170/9180 series programmable DC power supplies deliver clean, stable and precise output power due to the supplies’ exceptionally low ripple and noise, low temperature coefficient, excellent regulation and fast transient response time characteristics.

    These power supplies offer SCPI IEEE488.2 compliant USB (standard), RS232, RS485, GPIB and LAN interfaces, combined with front and rear panel output and remote sense terminals to facilitate test system development and integration. The LAN interface includes a built-in web server that allows users to configure, control, or monitor basic power supply settings.

    In addition to a full numerical keypad for convenient data entry, this series also provides unique features not typically found in comparable power sources, such as LED test modes, modular interface card slots, automatic range selection, and an optional 8-bit bidirectional digital I/O interface.

    • Single and dual output models with up to 210W output power
    • Exceptionally low ripple and noise
    • Front and rear panel output
    • List mode for executing up to 10 stored test sequences with a maximum of 150 steps in total
    • Overvoltage/overcurrent/overtemperature protection (OVP/OCP/OTP) and key-lock function
    • Fast transient response time of < 50 us for most models
    • Programmable voltage and current slew rates
    • Standard USB interface
    • 4 optional types of modular interface cards add LAN and GPIB, Digital I/O and Analog Control, RS485, or RS232 functionality
    • LabVIEW (TM) drivers available
       
    Model Guide
    Model 9171 9172 9173 9174 9181 9182 9183 9184 9185
    Voltage
    Ranges
    10V,
    20V
    35V,
    70V
    10V,
    20V
    35V,
    70V
    18V,
    36V
    10V,
    20V
    35V,
    70V
    100V,
    200V
    400V,
    600V
    Max
    Current
    10A,
    5A
    3A,
    1.5A
    10A,
    5A
    3A,
    1.5A
    8A,
    4A
    20A,
    10A
    6A,
    3A
    2A,
    1A
    0.5A,
    0.35A
    Number
    Outputs
    1 1 2 2 1 1 1 1 1

         

    Information Requests | Datasheet | Manual | Comparison Guide

     

    Multi-Range Programmable DC Power Supplies
    Models 9201, 9202, 9205 and 9206


    • Any 9200 series model can replace several supplies on your bench or in your rack. Unlike conventional supplies with fixed output ratings, these multi-range power supplies automatically recalculate voltage and current limits for each setting, providing full output power in any Volt/Amp combination within the rated voltage and current limits.

      For benchtop applications, these power supplies provide a numerical keypad for direct data entry along with convenient cursors and analog style knobs to quickly make incremental voltage or current changes. System integrators benefit from the standard USB (USBTMC-compliant), RS-232, and GPIB interfaces supporting SCPI commands.

      • Multi-ranging operation
      • High programming and readback resolution of 1 mV/0.1 mA
      • Output timer function
      • List mode programming
      • Store and recall up to 72 instrument settings
      • Standard USB (USBTMC-compliant), RS-232, and GPIB interfaces supporting SCPI commands for remote control
      • Remote sense
      • Overvoltage protection (OVP), overpower protection (OPP), overtemperature protection (OTP), and key-lock function
      • NI-certified LabVIEW driver and softpanel for remote control, test sequence generation, and datalogging available
      • Compact 19" half-rack form factor allows for side-by-side rack mounting of two units

      Models

      Voltage Current Max Power
      9201 0 - 60 V 0 - 10 A 200 W
      9202 0 - 60 V 0 - 15 A 360 W
      9205 0 - 60 V 0 - 25 A 600 W
      9206 0 - 150 V 0 - 10 A 600 W

       

         

    Information Requests | Datasheet | Manual